100mm Powapost Repair Spike
Now Just: £9.99
Customise your options
The 100mm Powapost Repair Spike is a special post shoe designed to provide a quick and easy solution to broken or rotted timber fence posts. Fence posts set into the ground can easily rot or break due to weather and ground conditions. This repair spike is easy to use and will save you time and hassle. This repair spike will help you repair spikes without need for concrete picks, a shovel or any machinery.
To use this spike simply cut down the broken or damaged post so it is flush with the ground or concrete surrounding it. Then using a rubber mallet carefully hammer the repair spike over the post and between the concrete. The repair spike should slot into the broken post and surrounding ground or concrete. Your new fence post can be bolted down to the top of the repair spike. The repair spike is made from high quality zinc coated rust resistant steel. This repair spike is suitable for 95mm timber fence posts.This product is suitable for use with a 95mm timber fence post.
Unless otherwise stated, our buildings are supplied flat packed as DIY kits with full instructions.
Buildings with styrene windows - our styrene windows are protected using a clear film which will need to be removed after you've installed the building.
It is the customer's responsibility to follow the instructions outlined in Aftercare.
All of our buildings are delivered unpainted. The buildings are dressed for display, we don't supply any accessories or shelves featured within the product images.
Exact product dimensions are supplied on the listing as we do round off the main size of the building in order to make it easier for customers to find, so please be sure to check the item's specific measurements carefully.
All measurements refer to the exterior of the building which includes the roof overhang unless stated otherwise.
We also would recommend against arranging for a third party to install the building before it's been delivered and checked that all parts are present, as we cannot be held liable for any third party costs.
Delivery times highlighted with an asterisk (*) refer to working days.
All of our buildings are dip treated, once installed they will need treating as soon as possible and on an annual basis in order to receive the 10 year anti rot guarantee. The building also includes a 1 year manufacturers guarantee as standard.
If your building is fitted with styrene windows, they are protected using a clear film which will need to be removed after you've installed the building.
We offer a 14 day money back guarantee on all of our items. The guarantee commences from the date which you receive your item and we offer a free collection service as part of this agreement.
The building must be returned in its original, untreated, resalable condition. Until the item is collected by our courier, it's the responsibility of the customer to ensure that the building remains in this condition.
As the buildings are sold as DIY kits, we cannot dismantle on your behalf and we cannot be held liable for any third party costs. Once the building has been received by our factory, a full refund will be issued within 1-3 working days.
Natural Wood Characteristicts
As wood is a natural material it may be affected by the following:
Shrinkage & Warping
The timber used in the construction of your garden building will have retained some of its natural moisture content. The moisture content of the timber will vary, depending upon prevailing environmental conditions, which will result in the components either naturally expanding or contracting. As the components dry out shrinkage may occur. A good waterproofing treatment from the start is the best protection to minimise the effect of moisture loss/intake.
Damp & Mould
During the winter months, cold and damp conditions can result in an increased amount of moisture within your garden building, especially when used infrequently. Condensation can form on the timber and other items stored within your garden building. If left this moisture is likely to cause mould and mildew. To prevent the build-up of moisture, we recommend leaving the door or windows of your building open from time to time, to allow the fresh air to circulate. We also advise against storing wet or damp items in your garden building as this will also increase the level of moisture in the building. If mould or mildew does start to form within your building we recommend using an anti-mould cleaner to remove it and to prevent it spreading, which if left untreated could permanantly damage your garden building.
Splits, Cracks & Knots
Small splits and cracks in some components or holes may appear where knots shrink and fall out. This will not affect the structure of your garden building however if you wish to fill them this can be easily done using any good quality wood filler
Sap is naturally occurring in wood and may appear in some boards of your garden building. If you wish to remove the sap, we advise waiting until it is dry and then using a sharp knife to carefully remove it. If the removal of the sap causes a hole in the timber, we recommend using a good quality wood filler to fill it.
Please be aware that these are natural timber characteristics which in most cases will not impact the structure or function of the garden building, therefore are not considered as product defects (as outlined within our Terms & Conditions). If you require further advise or information please contact our friendly Customer Services Team.