Waltons 3 x 4 Pressure Treated Flat Top Picket Wooden Garden Gate
Now Just: £44.99
Pressure treated timber
15 Year Anti Rot Guarantee
16mm Picket Boards
Thick 28mm x 70mm Framing
Customise your options
In stock
Delivery Charges Explained
A surcharge of £9.95 will be required for orders under £100
Description
This elegant Picket Flat Top Garden Gate is the perfect garden accessory for completing a fencing row project; the charming nature of this wooden gate means it is a must have in the garden. This palisade gate has been made using rough sawn pressure treated timber that is FSC® certified to ensure a premium quality finish. Picket gates are made by fitting panels to a wooden rail with a gap left in between on purpose; we then fit a diagonal ledge to add extra support. This method of construction offers a robust structure that will comfortably stand the test of time.
We have used modern day levels of craftsmanship to build this rustic garden gate; the end result is a palisade gate that will look great in front of any garden feature. The secure nature of this gate means you can build an entrance to a garden pond that will keep children and pets out, without blocking out the view of the feature. The timber has been pressure treated in our factory to provide a protective barrier against wood rot and decay; this process involves compacting preservative into the fibres of the timber. This gate is supplied with a 15 year anti-rot guarantee.
Important Information
Unless otherwise stated, our fencing panels are supplied complete and premade.
It is the customer's responsibility to follow the instructions outlined in the Fencing guide.
All of our Fence Panels are delivered unpainted.
Exact product dimensions are supplied on the listing as we do round off the main size of the fence in order to make it easier for customers to find, so please be sure to check the item's specific measurements carefully.
Delivery times highlighted with an asterisk (*) refer to working days.
Aftercare
All of our fence panels and gates are pressure treated. Once installed, we recommend treating as soon as possible (and on an annual basis) with a waterproof treatment to help preserve a consistent colour and help with water run off. Our fencing products benefit from a 15 year anti rot guarantee as well as a 1 year manufacturer's guarantee as standard.
Sheducation
Natural Wood Characteristicts
As wood is a natural material it may be affected by the following:
Shrinkage & Warping
The timber used in the construction of your garden building will have retained some of its natural moisture content. The moisture content of the timber will vary, depending upon prevailing environmental conditions, which will result in the components either naturally expanding or contracting. As the components dry out shrinkage may occur. A good waterproofing treatment from the start is the best protection to minimise the effect of moisture loss/intake.
Damp & Mould
During the winter months, cold and damp conditions can result in an increased amount of moisture within your garden building, especially when used infrequently. Condensation can form on the timber and other items stored within your garden building. If left this moisture is likely to cause mould and mildew. To prevent the build-up of moisture, we recommend leaving the door or windows of your building open from time to time, to allow the fresh air to circulate. We also advise against storing wet or damp items in your garden building as this will also increase the level of moisture in the building. If mould or mildew does start to form within your building we recommend using an anti-mould cleaner to remove it and to prevent it spreading, which if left untreated could permanantly damage your garden building.
Splits, Cracks & Knots
Small splits and cracks in some components or holes may appear where knots shrink and fall out. This will not affect the structure of your garden building however if you wish to fill them this can be easily done using any good quality wood filler
Sap
Sap is naturally occurring in wood and may appear in some boards of your garden building. If you wish to remove the sap, we advise waiting until it is dry and then using a sharp knife to carefully remove it. If the removal of the sap causes a hole in the timber, we recommend using a good quality wood filler to fill it.
Please be aware that these are natural timber characteristics which in most cases will not impact the structure or function of the garden building, therefore are not considered as product defects (as outlined within our Terms & Conditions). If you require further advise or information please contact our friendly Customer Services Team.
