.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
4 x 6 Pressure Treated Feather Edge Fence Panel
Now Just: £38.99
5/5 (100%) 1 Reviews
15 Year Anti Rot Guarantee
Pressure treated timber
Rustic Rough Sawn boards
Strong Horizontal back framing
2-5 Days Delivery
Watch Videos
Customise your options
Do you need fence posts?
Delivery Charges Explained
A surcharge of £9.95 will be required for orders under £100
Description
This 4ft x 6ft (HxW) Pressure Treated Feather Edge Fence Panel is ideal if you need to create a secure border in your garden or allotment. We have built this garden fencing panel using pressure treated overlapping timber to create an attractive and robust panel. Pressure treating is the process of vacuuming preservative into the fibres of the timber; this creating a highly durable panel. The horizontal ledging fitted to the rear of this fencing panel offers strong support against adverse weather conditions.
We wanted to ensure this fencing panel would look great in any style of garden; we did this by combining a mixture of modern building techniques and classic aesthetics. This pressure treated fencing panel is perfect for keeping toddlers and family pets in the garden because it is both robust and secure. A 15 year anti-rot guarantee is supplied with this wooden fencing so that you can be sure your new product will offer many years of reliable service.
Important Information
Unless otherwise stated, our fencing panels are supplied complete and premade.
It is the customer's responsibility to follow the instructions outlined in the Fencing guide.
All of our Fence Panels are delivered unpainted.
Exact product dimensions are supplied on the listing as we do round off the main size of the fence in order to make it easier for customers to find, so please be sure to check the item's specific measurements carefully.
Delivery times highlighted with an asterisk (*) refer to working days.
Aftercare
All of our fence panels and gates are pressure treated. Once installed, we recommend treating as soon as possible (and on an annual basis) with a waterproof treatment to help preserve a consistent colour and help with water run off. Our fencing products benefit from a 15 year anti rot guarantee as well as a 1 year manufacturer's guarantee as standard.
Videos
Play Video
Play Video
Reviews
Unlike many companies, we publish all of our reviews - good or bad - to give you, the customer, total transparency and peace of mind.
Sheducation
Natural Wood Characteristicts
As wood is a natural material it may be affected by the following:
Shrinkage & Warping
The timber used in the construction of your garden building will have retained some of its natural moisture content. The moisture content of the timber will vary, depending upon prevailing environmental conditions, which will result in the components either naturally expanding or contracting. As the components dry out shrinkage may occur. A good waterproofing treatment from the start is the best protection to minimise the effect of moisture loss/intake.
Damp & Mould
During the winter months, cold and damp conditions can result in an increased amount of moisture within your garden building, especially when used infrequently. Condensation can form on the timber and other items stored within your garden building. If left this moisture is likely to cause mould and mildew. To prevent the build-up of moisture, we recommend leaving the door or windows of your building open from time to time, to allow the fresh air to circulate. We also advise against storing wet or damp items in your garden building as this will also increase the level of moisture in the building. If mould or mildew does start to form within your building we recommend using an anti-mould cleaner to remove it and to prevent it spreading, which if left untreated could permanantly damage your garden building.
Splits, Cracks & Knots
Small splits and cracks in some components or holes may appear where knots shrink and fall out. This will not affect the structure of your garden building however if you wish to fill them this can be easily done using any good quality wood filler
Sap
Sap is naturally occurring in wood and may appear in some boards of your garden building. If you wish to remove the sap, we advise waiting until it is dry and then using a sharp knife to carefully remove it. If the removal of the sap causes a hole in the timber, we recommend using a good quality wood filler to fill it.
Please be aware that these are natural timber characteristics which in most cases will not impact the structure or function of the garden building, therefore are not considered as product defects (as outlined within our Terms & Conditions). If you require further advise or information please contact our friendly Customer Services Team.
.jpg)
.jpg)
.jpg)
.jpg){kind=small}