5 x 6 Pressure Treated Vertical Hit & Miss Fence Panel
Now Just: £31.99
5/5 (100%) 2 Reviews
2-5 Days Delivery
Watch Videos
Customise your options
Do you need fence posts?
Delivery Charges Explained
A surcharge of £9.95 will be required for orders under £100
Description
Building a fencing row in an area that is prone to high gusts of wind can be troublesome, that is why this 5ft x 6ft (HxW) Vertical Hit & Miss Pressure Treated Fencing Panel offers the perfect solution for fencing rows that won’t stay upright. The panels of this wooden fence are laid against the edge of each other; a slat is then fitted over the gap that has been left in between. This type of construction allows wind to pass through the small gaps in between the slats; it also helps provide a strong and robust structure. Horizontal ledging has been installed to the rear of this panel to offer additional support against harsh weather.
The attractive and versatile nature of this wooden fencing panel means it looks great in a variety of situations; whether it is used to create a private sitting out area during the summer months, or whether it is used to keep your family pets in the garden. This wooden fencing has been pressure treated in our factory, this is the process of compacting preservative into the timber, the end result is a long lasting finish that helps protect against rotting and decay.
Important Information
Unless otherwise stated, our fencing panels are supplied complete and premade.
It is the customer's responsibility to follow the instructions outlined in the Fencing guide.
All of our Fence Panels are delivered unpainted.
Exact product dimensions are supplied on the listing as we do round off the main size of the fence in order to make it easier for customers to find, so please be sure to check the item's specific measurements carefully.
Delivery times highlighted with an asterisk (*) refer to working days.
Aftercare
All of our fence panels and gates are pressure treated. Once installed, we recommend treating as soon as possible (and on an annual basis) with a waterproof treatment to help preserve a consistent colour and help with water run off. Our fencing products benefit from a 15 year anti rot guarantee as well as a 1 year manufacturer's guarantee as standard.
Videos
Play Video
Play Video
Reviews
Unlike many companies, we publish all of our reviews - good or bad - to give you, the customer, total transparency and peace of mind.
Sheducation
Natural Wood Characteristicts
As wood is a natural material it may be affected by the following:
Shrinkage & Warping
The timber used in the construction of your garden building will have retained some of its natural moisture content. The moisture content of the timber will vary, depending upon prevailing environmental conditions, which will result in the components either naturally expanding or contracting. As the components dry out shrinkage may occur. A good waterproofing treatment from the start is the best protection to minimise the effect of moisture loss/intake.
Damp & Mould
During the winter months, cold and damp conditions can result in an increased amount of moisture within your garden building, especially when used infrequently. Condensation can form on the timber and other items stored within your garden building. If left this moisture is likely to cause mould and mildew. To prevent the build-up of moisture, we recommend leaving the door or windows of your building open from time to time, to allow the fresh air to circulate. We also advise against storing wet or damp items in your garden building as this will also increase the level of moisture in the building. If mould or mildew does start to form within your building we recommend using an anti-mould cleaner to remove it and to prevent it spreading, which if left untreated could permanantly damage your garden building.
Splits, Cracks & Knots
Small splits and cracks in some components or holes may appear where knots shrink and fall out. This will not affect the structure of your garden building however if you wish to fill them this can be easily done using any good quality wood filler
Sap
Sap is naturally occurring in wood and may appear in some boards of your garden building. If you wish to remove the sap, we advise waiting until it is dry and then using a sharp knife to carefully remove it. If the removal of the sap causes a hole in the timber, we recommend using a good quality wood filler to fill it.
Please be aware that these are natural timber characteristics which in most cases will not impact the structure or function of the garden building, therefore are not considered as product defects (as outlined within our Terms & Conditions). If you require further advise or information please contact our friendly Customer Services Team.
.jpg)
