Aerotek 40V Cordless Leaf Blower without Battery & Charger
Now Just: £34.99
- Powerful; 40-volt battery to make blowing leaves quick and easy
- Cordless; With no leads to restrict you or get tangled up in, you can carry out jobs wherever you need to
- Compact; Space-saving design with a detachable blower tube for easy storage
- Lightweight; Easy to use thanks to it weighing only 2.28 kilograms
- Guarantee; 12-month guarantee
Out of Stock
Aerotek 40V Cordless Leaf Blower
Effortlessly tidy up your garden of leaves and small debris with this 40V cordless leaf blower from Aerotek. The powerful 40V machine is completely cordless, meaning there are no leads to restrict you or get tangled up in, it also allows you to carry out jobs wherever and whenever you need to.
The long blower tube is perfect for blowing leaves out of hard to reach places into a neat and easy to remove pile. Once you have finished, the blower tube can be removed, and thanks to this innovative space-saving design the machine can easily be stored away.
Ergonomically designed, this leaf blower features a soft grip handle and is comfortable to use thanks to it only weighing 2.28kg.
The quick-charging Series X2 battery required to power this leaf blower has been designed to work with the whole Aerotek Series X2 Garden Power Range.
Please note: Battery and charger are sold separately. The Series X2 battery is only compatible with the Aerotek Series X2 40v Lawnmower and Series X2 40v Garden Power Range.
Leaf Blower: L88.5 x W19.5 x H30.5cm
Input power: 750W
No load speed: 900-1550/min
Delivery InformationDelivery on this product is available to most UK Mainland addresses.
We take every care to ensure that you receive the correct goods in perfect condition. In the unlikely event that you ever need to return any item to us and it is within our 30-day warranty period then please contact us for a returns authorisation number. Our customer service team will then provide you with our returns address.
All goods must be returned via recorded, insured method at your own cost. We cannot be held responsible for returns parcels lost in transit. It is the sender's responsibility to ensure parcels are adequately insured. If the goods exceed Â£46 in value we strongly suggest that you take out additional insurance. In order that we can satisfy your requirements promptly we will need your full instructions, explaining the reason for the return and the action you wish us to take.
Natural Wood Characteristicts
As wood is a natural material it may be affected by the following:
Shrinkage & Warping
The timber used in the construction of your garden building will have retained some of its natural moisture content. The moisture content of the timber will vary, depending upon prevailing environmental conditions, which will result in the components either naturally expanding or contracting. As the components dry out shrinkage may occur. A good waterproofing treatment from the start is the best protection to minimise the effect of moisture loss/intake.
Damp & Mould
During the winter months, cold and damp conditions can result in an increased amount of moisture within your garden building, especially when used infrequently. Condensation can form on the timber and other items stored within your garden building. If left this moisture is likely to cause mould and mildew. To prevent the build-up of moisture, we recommend leaving the door or windows of your building open from time to time, to allow the fresh air to circulate. We also advise against storing wet or damp items in your garden building as this will also increase the level of moisture in the building. If mould or mildew does start to form within your building we recommend using an anti-mould cleaner to remove it and to prevent it spreading, which if left untreated could permanantly damage your garden building.
Splits, Cracks & Knots
Small splits and cracks in some components or holes may appear where knots shrink and fall out. This will not affect the structure of your garden building however if you wish to fill them this can be easily done using any good quality wood filler
Sap is naturally occurring in wood and may appear in some boards of your garden building. If you wish to remove the sap, we advise waiting until it is dry and then using a sharp knife to carefully remove it. If the removal of the sap causes a hole in the timber, we recommend using a good quality wood filler to fill it.
Please be aware that these are natural timber characteristics which in most cases will not impact the structure or function of the garden building, therefore are not considered as product defects (as outlined within our Terms & Conditions). If you require further advise or information please contact our friendly Customer Services Team.