Garden Gear 1.2-Metre Fan Trellis
Now Just: £11.99
Out of Stock
Description
Garden Gear 1.2-Metre Fan Trellis
Perfect for growing beautiful plants or flowers, this coated metal trellis from Garden Gear will add a new dimension to your garden.
Designed from metal with a PE coating, this trellis is made to withstand even the worst of weather and will look great in years to come. This trellis will instantly transform your garden, whether you have a big space or smaller space like a balcony or patio.
Perfect if you want to add climbing plants to your garden such as jasmine, roses and clematis.
Register your product for a free extended 2-year warranty by visiting our website www.gardengearonline.co.uk/extended-warranty. The product must be registered, along with your contact information, within 30 days of purchase. For full terms and conditions please visit our website.
Specifications
Dimensions: H120 x W61cm
Weight: 348g
Assembly required
Sheducation
Natural Wood Characteristicts
As wood is a natural material it may be affected by the following:
Shrinkage & Warping
The timber used in the construction of your garden building will have retained some of its natural moisture content. The moisture content of the timber will vary, depending upon prevailing environmental conditions, which will result in the components either naturally expanding or contracting. As the components dry out shrinkage may occur. A good waterproofing treatment from the start is the best protection to minimise the effect of moisture loss/intake.
Damp & Mould
During the winter months, cold and damp conditions can result in an increased amount of moisture within your garden building, especially when used infrequently. Condensation can form on the timber and other items stored within your garden building. If left this moisture is likely to cause mould and mildew. To prevent the build-up of moisture, we recommend leaving the door or windows of your building open from time to time, to allow the fresh air to circulate. We also advise against storing wet or damp items in your garden building as this will also increase the level of moisture in the building. If mould or mildew does start to form within your building we recommend using an anti-mould cleaner to remove it and to prevent it spreading, which if left untreated could permanantly damage your garden building.
Splits, Cracks & Knots
Small splits and cracks in some components or holes may appear where knots shrink and fall out. This will not affect the structure of your garden building however if you wish to fill them this can be easily done using any good quality wood filler
Sap
Sap is naturally occurring in wood and may appear in some boards of your garden building. If you wish to remove the sap, we advise waiting until it is dry and then using a sharp knife to carefully remove it. If the removal of the sap causes a hole in the timber, we recommend using a good quality wood filler to fill it.
Please be aware that these are natural timber characteristics which in most cases will not impact the structure or function of the garden building, therefore are not considered as product defects (as outlined within our Terms & Conditions). If you require further advise or information please contact our friendly Customer Services Team.
