Logmaster 7 Tonne Kinetic Log Splitter
Now Just: £419.99
- Powerful; Maximum ram pressure force of 7 tonnes will split wood efficiently
- Safer splitting; Quick, quiet and highly safe operation, no need to swing a sharp axe
- Easy to use; Easy operation, automatic return, streamlined build and wheels for transportation when not in use
- Faster splitting; Using kinetic flywheel technology this splitter can split wood in approximately 3 seconds
- Guarantee; 12-month guarantee
Available for delivery on Oct 18 2020
DescriptionForget the days of backbreaking work chopping logs, the Logmaster seven-tonne kinetic log splitter does it for you, enabling you to prepare, dry out and store logs at any time of the year. Kinetic log splitters operate without oil and hydraulics, storing energy in the flywheel which is released in a sudden burst. They combine speed and force for quick and efficient results.
Efficient and labour-saving, it will turn this laborious and dangerous chore into a quick, quiet, easy and automatic task, splitting logs in approximately three seconds. With safe operation and streamlined, maintenance-free steel construction, it will split all logs including seasoned and green wood, to a maximum log size of 40cm in length and 30cm in width, in just seconds.
Powered by 230V mains power, it incorporates kinetic flywheel technology and it is easily transportable on its sturdy wheels.
Also available is a 15m extension cable, ideal for large gardens, plus a circuit breaker socket for complete peace of mind when working.
Due to courier limitations we are unable to deliver this product outside mainland UK, to Scottish Highlands, Isles or BFPO addresses.
Dimensions: L115.5 x W30 x H68cm
Log length: 40cm
Log width: 10-30cm
Cord length: 160cm
Delivery InformationDelivery on this product is available to most UK Mainland addresses.
We take every care to ensure that you receive the correct goods in perfect condition. In the unlikely event that you ever need to return any item to us and it is within our 30-day warranty period then please contact us for a returns authorisation number. Our customer service team will then provide you with our returns address.
All goods must be returned via recorded, insured method at your own cost. We cannot be held responsible for returns parcels lost in transit. It is the sender's responsibility to ensure parcels are adequately insured. If the goods exceed Â£46 in value we strongly suggest that you take out additional insurance. In order that we can satisfy your requirements promptly we will need your full instructions, explaining the reason for the return and the action you wish us to take.
Natural Wood Characteristicts
As wood is a natural material it may be affected by the following:
Shrinkage & Warping
The timber used in the construction of your garden building will have retained some of its natural moisture content. The moisture content of the timber will vary, depending upon prevailing environmental conditions, which will result in the components either naturally expanding or contracting. As the components dry out shrinkage may occur. A good waterproofing treatment from the start is the best protection to minimise the effect of moisture loss/intake.
Damp & Mould
During the winter months, cold and damp conditions can result in an increased amount of moisture within your garden building, especially when used infrequently. Condensation can form on the timber and other items stored within your garden building. If left this moisture is likely to cause mould and mildew. To prevent the build-up of moisture, we recommend leaving the door or windows of your building open from time to time, to allow the fresh air to circulate. We also advise against storing wet or damp items in your garden building as this will also increase the level of moisture in the building. If mould or mildew does start to form within your building we recommend using an anti-mould cleaner to remove it and to prevent it spreading, which if left untreated could permanantly damage your garden building.
Splits, Cracks & Knots
Small splits and cracks in some components or holes may appear where knots shrink and fall out. This will not affect the structure of your garden building however if you wish to fill them this can be easily done using any good quality wood filler
Sap is naturally occurring in wood and may appear in some boards of your garden building. If you wish to remove the sap, we advise waiting until it is dry and then using a sharp knife to carefully remove it. If the removal of the sap causes a hole in the timber, we recommend using a good quality wood filler to fill it.
Please be aware that these are natural timber characteristics which in most cases will not impact the structure or function of the garden building, therefore are not considered as product defects (as outlined within our Terms & Conditions). If you require further advise or information please contact our friendly Customer Services Team.