4 x 4 Princess Playhouse
Now Just: £319.99
4.6/5 (92%) 60 Reviews
Delivery from 14/05/2021 (*subject to delivery postcode)
10 Year Anti Rot Guarantee
Mineral Felt Included
Made in accordance with Toys (Safety) Regulation 2011 (EN71) for ages 36 months+
Read Our Playhouse Buying Guide
Customise your options
Let your little ones' creativity run wild in this Princess playhouse! Packed with character and charm, this playhouse features 3 traditional windows and an apex roofline. Perfect for creating a princess paradise! Ideal for younger children, this petite garden playhouse will inspire imaginations while helping them fall in love with outdoor play.
Built from high-quality shiplap tongue & groove, with solid sheet board roof and floor, this playhouse has a strong and long-lasting finish for everyday play.
Safety is the most important aspect of our design process, so all our playhouses have the following safety features:
- EN71 certified and UKCA marked
- 12mm safety gap to prevent trapped fingers
- Styrene windows, a safer alternative to glass
- Rounded timbers to prevent splinters
- Ventilation holes
For domestic use only. Suitable for 36 months +.
Please note: This playhouse will be delivered unpainted.
Our dip treated playhouses, once installed, will need treating as soon as possible and on an annual basis in order to receive the 10 year anti rot guarantee*. The playhouse also includes a 1 year manufacturers guarantee* as standard.
Dip Treated Playhouses
All of our playhouses have been independently tested to be EN71 certified and UKCA marked.
Our playhouses are supplied flat packed as DIY kits with full instructions.
It is the customer's responsibility to follow the product instructions and the information outlined within the Manufacturers recommendations.
All of our playhouses are delivered unpainted. The playhouses are dressed for display, we don't supply any accessories or shelves featured within the product images.
Our factory applied dip treatment may differ in shade between components as it is simply a basecoat.
Exact product dimensions are supplied on the listing as we do round off the main size of the building in the title in order to make it easier for customers to find, so please be sure to check the item's specific measurements carefully.
Delivery times highlighted with an asterisk (*) refer to working days.
10 Year Anti-Rot Guarantee
Our dip treated playhouses come with a 10 year anti rot guarantee. Anti-rot protection guards against fungal decay. The guarantee does not cover movement, twisting, warping or splitting of timber products over time.
during manufacture we apply a water based colourant for protection whilst in storage and transit. This treatment is not a preservative therefore the product will require a preservative and waterproofing top coat application as soon after construction as possible.
In order to keep your playhouse in tip top shape and maintain the 10 year anti rot guarantee, it will need re-treating at least annually. Only high quality timber preservatives should be used and applied in accordance with the manufacturer's recommendations. This must be done at least annually to preserve the 10 year anti rot guarantee. For more information please refer to the Waltons T&C's.
1 Year Manufacturer's Guarantee
Subject to the conditions set out in the T&C's (Section 8) the Seller warrants that the Goods will correspond with their specification at the time of delivery and will be free from defects in material and workmanship for a period of 12 months.
Whilst we work hard to design all of our garden buildings to adhere to planning permission guidelines, we cannot guarantee that planning permission will not be required. Therefore we advise that it is always best to check with your local authorities before erecting a garden building.
We want you and your children to enjoy the use of your new playhouse for many years. To ensure this, it is important your playhouse is protected at the start and maintained during its life. If you're planning a DIY project, please read our Self-Installation & How to Build a Shed advice pages before you start.
All long-lasting playhouses will have been built on a solid and level base, either concrete, slabs, a wooden frame or ground level bearers. A flat, level base is essential, for more information go to our How to Build a Shed Base guide.
If your playhouse is not level and square when built, it will twist and warp with the natural movement of the wood. The first signs of this are when the doors or windows stop opening and closing properly. You may get issues with the roof and potential gaps in the panels which will allow water in, there may be flex in the floor and probably creaking. Check your base is level in both directions and adjust prior to the build. It will be really difficult to adjust afterwards.
Our styrene windows are protected using a clear film which will need to be removed after you've installed and treated the playhouse. This can be removed easily by scoring round the edge of the window and peeling back the plastic covering.
All Waltons playhouse windows are designed to fit well, but over time and with the movement of wood, small gaps can appear. Help to prevent this by sealing your windows with a silicone sealant. You can do this either when you build your playhouse, or add it to an existing one. We've created this video Protect Your Shed - Silicone Window Sealant for guidance.
We've also created these handy Maintenance Guides to help you make the most out of your playhouse, for years to come. Should you require any further advice, you can contact our Customer Service Team on 0800 029 1000 and select Option 3.
Please Note: Sizes are approximate only. For specific details, please consult our technical department.
|Imperial Size (ft)||4 x 4|
|People Req'd To Build||2|
|Anti-Rot Guarantee||10 Years|
|Cladding Material||12mm Tongue and Groove|
|Roof Material||8mm Solid Sheet Board|
|Floor Material||8mm Solid Sheet Board|
|Under 2.5m Tall||Yes|
You can book the day of your choice for delivery when placing your order, alternatively you may place your order without selecting a delivery date and one of our team will contact you directly to arrange a suitable delivery date.
All our deliveries take place between 7am and 7pm. It is our preference that you or a friend/neighbour are present to receive the delivery to ensure you are happy with the item and can sign if required. In some cases we may be able to leave the item in a safe a location - If you require this please contact our delivery team prior to delivery to organise.
On the day of delivery, we will send you a text to confirm your estimated two hour delivery slot and a link to our delivery portal, where you'll be able to track the exact location of the driver and an accurate time of arrival.
Your item will be delivered by either a 3.5T, 7.5T or 18T flatbed vehicle. Please let us know prior to delivery if you believe there could be any difficulties accessing your property or the delivery location.
To save you waiting around all day, you can use our live tracking service within the delivery portal. This will give you the exact location of the driver and an accurate time of arrival, down to the minute!
Your item will be delivered by a flatbed vehicle to kerbside only, by one delivery driver. The delivery driver will unload the item piece by piece to prevent any damage, depending on the size of the item this may take a few hours. At no point will the delivery driver require assistance with unloading the item.
Your item will be delivered by a flatbed van to kerbside only, though at the driver's discretion they may be able to help you lift the building to a more suitable location outside your property. If you need to transport the building through your property, for example if you live in a terraced house, then please be mindful that you will have to make your own arrangements prior to delivery to do this, as our drivers are not insured to enter your property and will therefore only deliver to the front of your property.
For delivery areas and charges please see 'Delivery Charges Explained' next to the 'Add to Basket' button above.
We offer a 14 day money back guarantee on all of our items. The guarantee commences from the date which you receive your item and we offer a free collection service as part of this agreement.
The building must be returned in its original, untreated, resalable condition. Until the item is collected by our courier, it's the responsibility of the customer to ensure that the building remains in this condition.
As the buildings are sold as DIY kits, we cannot dismantle on your behalf and we cannot be held liable for any third party costs. Once the building has been received by our factory, a full refund will be issued within 1-3 working days.
Unlike many companies, we publish all of our reviews - good or bad - to give you, the customer, total transparency and peace of mind.
Scroll through to learn more about the different cladding styles that are available for our playhouses.
We manufacture our shiplap cladding using thick, 12mm tongue and groove boards that lock together and are then nailed to vertical internal framing. Featuring a protective lip, this cladding protects your building from the weather with a tight seal. This type of construction is great for those looking to spend lots of time within the playhouse or for a more robust and strong storage solution.
Tongue &Groove Cladding
Although Tongue & Groove boards are generally used for the roof or floor, we do occasionally use this as cladding. This cladding is manufactured using 12mm tongue and groove boards that lock together and are then nailed to the vertical internalframing. This type of cladding is robust, strong and resistant to water ingress and draughts.
Our playhouses are dip treated during manufacture as standard. This is the process in which we apply a water based colourant for protection whilst in storage and transit. This is not a preservative therefore the building will require a preservative and waterproofing top coat application as soon after construction as possible. This is required to validate your 10 year anti-rot guarantee.
Timber is cut ready for treatment.
Timber is dipped into a cylider containing preservative.
Preservative is absorbed into the surface of the timber.
Timber is removed from cylinder containing preservative.
Timber is left to airdry.
Solid sheet board is an engineered wood formed by adding adhesive and then compressing layers of oriented strands of wood to form a strong and robust panel. This material is perfect for everyday use and will form a strong base or ceiling to your building.
Styrene is a lightweight product that offers a safe and shatterproof alternative to traditional glass glazing. Used as standard within our playhouse, summerhouse, playhouse and greenhouse ranges, styrene is ideal for those with busy gardens or young children.
Natural Wood Characteristicts
As wood is a natural material it may be affected by the following:
Shrinkage & Warping
The timber used in the construction of your garden building will have retained some of its natural moisture content. The moisture content of the timber will vary, depending upon prevailing environmental conditions, which will result in the components either naturally expanding or contracting. As the components dry out shrinkage may occur. A good waterproofing treatment from the start is the best protection to minimise the effect of moisture loss/intake.
Damp & Mould
During the winter months, cold and damp conditions can result in an increased amount of moisture within your garden building, especially when used infrequently. Condensation can form on the timber and other items stored within your garden building. If left this moisture is likely to cause mould and mildew. To prevent the build-up of moisture, we recommend leaving the door or windows of your building open from time to time, to allow the fresh air to circulate. We also advise against storing wet or damp items in your garden building as this will also increase the level of moisture in the building. If mould or mildew does start to form within your building we recommend using an anti-mould cleaner to remove it and to prevent it spreading, which if left untreated could permanantly damage your garden building.
Splits, Cracks & Knots
Small splits and cracks in some components or holes may appear where knots shrink and fall out. This will not affect the structure of your garden building however if you wish to fill them this can be easily done using any good quality wood filler
Sap is naturally occurring in wood and may appear in some boards of your garden building. If you wish to remove the sap, we advise waiting until it is dry and then using a sharp knife to carefully remove it. If the removal of the sap causes a hole in the timber, we recommend using a good quality wood filler to fill it.
Please be aware that these are natural timber characteristics which in most cases will not impact the structure or function of the garden building, therefore are not considered as product defects (as outlined within our Terms & Conditions). If you require further advise or information please contact our friendly Customer Services Team.