Serenity Lily Pad Cascade Water Feature
Now Just: £89.99
- Self-contained water feature; No need to connect to a water supply, just add water to the basin and switch it on
- Tranquil; Enjoy the relaxing sound of cascading water
- Stylish; Beautiful copper-effect lily pads gently cascade water to add a unique focal point to any outside space
- Durable; Constructed from a durable, yet lightweight polyresin that is frost and crack resistant
- Guarantee; 12-month guarantee
Out of Stock
Description
Serenity Lily Pad Cascade Water FeatureCreate a relaxing and tranquil atmosphere in your garden with this decorative lily pad cascade water feature from Serenity. Sit back and enjoy the calming sound of trickling water as you admire your new centrepiece which is sure to impress your guests, too.
Easy to Use
This water feature is mains powered, and is supplied with a 2-metre-long cable. Simply plug in, fill the basin with water, then sit back and relax as the water trickles away. Its beautiful, copper-effect lily pads gently cascade water to create a relaxing trickling water effect.
Durable
Manufactured using an incredibly durable polyresin, the water feature is weatherproof and will not rust or crack. When empty, the garden feature is lightweight for easy placement and portability.
This charming water feature will effortlessly transform your garden into a place that you can truly relax. Even when the feature is turned off, you can still admire the decorative nature of the garden ornament.

Due to courier limitations we are unable to deliver this product outside mainland UK, to Scottish Highlands, Isles or BFPO addresses.
Specification
Dimensions: L45 x W47 x H79cm
Weight: 5.5kg
Pump cable: 2m
Sheducation
Natural Wood Characteristicts
As wood is a natural material it may be affected by the following:
Shrinkage & Warping
The timber used in the construction of your garden building will have retained some of its natural moisture content. The moisture content of the timber will vary, depending upon prevailing environmental conditions, which will result in the components either naturally expanding or contracting. As the components dry out shrinkage may occur. A good waterproofing treatment from the start is the best protection to minimise the effect of moisture loss/intake.

Damp & Mould
During the winter months, cold and damp conditions can result in an increased amount of moisture within your garden building, especially when used infrequently. Condensation can form on the timber and other items stored within your garden building. If left this moisture is likely to cause mould and mildew. To prevent the build-up of moisture, we recommend leaving the door or windows of your building open from time to time, to allow the fresh air to circulate. We also advise against storing wet or damp items in your garden building as this will also increase the level of moisture in the building. If mould or mildew does start to form within your building we recommend using an anti-mould cleaner to remove it and to prevent it spreading, which if left untreated could permanantly damage your garden building.
Splits, Cracks & Knots
Small splits and cracks in some components or holes may appear where knots shrink and fall out. This will not affect the structure of your garden building however if you wish to fill them this can be easily done using any good quality wood filler


Sap
Sap is naturally occurring in wood and may appear in some boards of your garden building. If you wish to remove the sap, we advise waiting until it is dry and then using a sharp knife to carefully remove it. If the removal of the sap causes a hole in the timber, we recommend using a good quality wood filler to fill it.
Please be aware that these are natural timber characteristics which in most cases will not impact the structure or function of the garden building, therefore are not considered as product defects (as outlined within our Terms & Conditions). If you require further advise or information please contact our friendly Customer Services Team.