Serenity Metal Indoor & Outdoor Sunflowers Water Feature
Now Just: £49.99
- Water feature; Bright yellow metal sunflowers standing tall, perfect for use indoors or outdoors
- Self-contained; No need to connect to a water supply, just add water to the basin and switch on
- Tranquil; Enjoy the relaxing sound of cascading water
- Dimensions: L26 x W12 x H40m
- Guarantee; 12-month guarantee
Out of Stock
Description
Serenity Metal Indoor and Outdoor Purple Calle Lilies Water Feature
Create a stylish and relaxing space in your home or garden with this stunning sunflower water feature from Serenity. This eye-catching design will easily become the focal point indoors or outdoors, allowing you to design the ultimate space to unwind. This contemporary water feature will add beauty and style to any space as you watch the water gently cascade down.
The water feature is self-contained, making it great for those without a mains water supply through their garden or courtyard. Simply fill the basin with water and the hidden pump will recycle it continually. The pump carries the water up to the top and then it cascades back down into the basin in a continuous cycle.
Specifications
Dimensions: L26 x W12.2 x H39.5cm
Weight: 1.55kg
Power supply length: 186cm
Length of pump cable: 201.5cm
230-240V 50Hz
Sheducation
Natural Wood Characteristicts
As wood is a natural material it may be affected by the following:
Shrinkage & Warping
The timber used in the construction of your garden building will have retained some of its natural moisture content. The moisture content of the timber will vary, depending upon prevailing environmental conditions, which will result in the components either naturally expanding or contracting. As the components dry out shrinkage may occur. A good waterproofing treatment from the start is the best protection to minimise the effect of moisture loss/intake.

Damp & Mould
During the winter months, cold and damp conditions can result in an increased amount of moisture within your garden building, especially when used infrequently. Condensation can form on the timber and other items stored within your garden building. If left this moisture is likely to cause mould and mildew. To prevent the build-up of moisture, we recommend leaving the door or windows of your building open from time to time, to allow the fresh air to circulate. We also advise against storing wet or damp items in your garden building as this will also increase the level of moisture in the building. If mould or mildew does start to form within your building we recommend using an anti-mould cleaner to remove it and to prevent it spreading, which if left untreated could permanantly damage your garden building.
Splits, Cracks & Knots
Small splits and cracks in some components or holes may appear where knots shrink and fall out. This will not affect the structure of your garden building however if you wish to fill them this can be easily done using any good quality wood filler


Sap
Sap is naturally occurring in wood and may appear in some boards of your garden building. If you wish to remove the sap, we advise waiting until it is dry and then using a sharp knife to carefully remove it. If the removal of the sap causes a hole in the timber, we recommend using a good quality wood filler to fill it.
Please be aware that these are natural timber characteristics which in most cases will not impact the structure or function of the garden building, therefore are not considered as product defects (as outlined within our Terms & Conditions). If you require further advise or information please contact our friendly Customer Services Team.