Serenity Sculpted Four-Tier Bowl Water Feature
Now Just: £164.99
- Attractive; A stylish water feature, consisting of 4 stone-effect bowls on different levels, highlighted by 4 LED lights
- Relaxing; Enjoy the relaxing sound of cascading water
- Indoor and outdoor; The water feature is perfect for indoor and outdoor use
- Durable; Made from lightweight but durable weatherproof stone powder and polyresin that will not rust or crack
- Dimensions; L41 x W38.5 x H72cm
Out of Stock
Description
Serenity Sculpted Four-Tier Bowl Water Feature
Create a beautiful focal point in any garden, courtyard or conservatory with this four-tier bowl water feature. This attractive design features four levels, each with a stone-effect bowl that is highlighted by a LED light, allowing it to be enjoyed day and night.
The water feature is mains-powered and comes with a two-metre-long cable. Simply fill the basin with water, plug in at the mains and the hidden pump will cycle the water continually, carrying the water up to the highest bowl, it then cascades down into the middle tiers and travels down into the lowest bowl in a continuous cycle.
Constructed from a highly durable and weatherproof polyresin, this feature will withstand even the worst of weather, it will not rust or crack and is lightweight when unfilled for easy placement and portability.
When plugged in, this feature will create a relaxing and tranquil atmosphere with the gentle sound of running water, and if the pump is turned off this four-tier bowl water feature will still make an attractive focal point with its style and charm.
12-month guarantee.
Specifications
Dimensions: L41 x W38.5 x H72cm
Weight: 11.10kg
Pump cable length: 205.5cm
Sheducation
Natural Wood Characteristicts
As wood is a natural material it may be affected by the following:
Shrinkage & Warping
The timber used in the construction of your garden building will have retained some of its natural moisture content. The moisture content of the timber will vary, depending upon prevailing environmental conditions, which will result in the components either naturally expanding or contracting. As the components dry out shrinkage may occur. A good waterproofing treatment from the start is the best protection to minimise the effect of moisture loss/intake.

Damp & Mould
During the winter months, cold and damp conditions can result in an increased amount of moisture within your garden building, especially when used infrequently. Condensation can form on the timber and other items stored within your garden building. If left this moisture is likely to cause mould and mildew. To prevent the build-up of moisture, we recommend leaving the door or windows of your building open from time to time, to allow the fresh air to circulate. We also advise against storing wet or damp items in your garden building as this will also increase the level of moisture in the building. If mould or mildew does start to form within your building we recommend using an anti-mould cleaner to remove it and to prevent it spreading, which if left untreated could permanantly damage your garden building.
Splits, Cracks & Knots
Small splits and cracks in some components or holes may appear where knots shrink and fall out. This will not affect the structure of your garden building however if you wish to fill them this can be easily done using any good quality wood filler


Sap
Sap is naturally occurring in wood and may appear in some boards of your garden building. If you wish to remove the sap, we advise waiting until it is dry and then using a sharp knife to carefully remove it. If the removal of the sap causes a hole in the timber, we recommend using a good quality wood filler to fill it.
Please be aware that these are natural timber characteristics which in most cases will not impact the structure or function of the garden building, therefore are not considered as product defects (as outlined within our Terms & Conditions). If you require further advise or information please contact our friendly Customer Services Team.