Serenity Spiral Rainfall Water Feature with Planter
Now Just: £184.99
- Spiral rainfall water feature; A modern and stunning water feature to add a stylish focal point to any outside space, also features LED lights so you can enjoy it day or night
- Self-contained; No need to connect to a water supply, just add water to the basin and switch it on
- Planter; Space to plant flowers at the top of the feature to fit the aesthetic of your garden
- Durable; Constructed from a durable yet lightweight polyresin that helps prevent frost damage and cracks
- Dimensions; L31 x W30.5 x H79cm
Out of Stock
Description
Serenity Spiral Rainfall Water Feature with Planter
Instantly modernise your garden with this spiral rainfall water feature from Serenity. At the top of the water feature is a section where you can plant your own flowers, the water feature then spirals down to the ground, cascading water downwards, giving the look, feel and sound of rain pouring down, a treat for the eyes and ears.
The water feature is self-contained, making it great for those without a mains water supply through their garden or courtyard. Simply fill the basin with water and the hidden pump will recycle it continually. The pump carries the water up to the top and then it cascades back down into the basin in a continuous cycle.
Constructed from a durable yet lightweight polyresin to help prevent frost damage and cracking.
Please note: Please plant into a separate planter, do not plant directly into the water feature.
Specifications
Dimensions: L31 x W30.5 x H79cm
Weight: 10.71kg
Pump cable length: 10m
Mains powered
12-month guarantee
Sheducation
Natural Wood Characteristicts
As wood is a natural material it may be affected by the following:
Shrinkage & Warping
The timber used in the construction of your garden building will have retained some of its natural moisture content. The moisture content of the timber will vary, depending upon prevailing environmental conditions, which will result in the components either naturally expanding or contracting. As the components dry out shrinkage may occur. A good waterproofing treatment from the start is the best protection to minimise the effect of moisture loss/intake.

Damp & Mould
During the winter months, cold and damp conditions can result in an increased amount of moisture within your garden building, especially when used infrequently. Condensation can form on the timber and other items stored within your garden building. If left this moisture is likely to cause mould and mildew. To prevent the build-up of moisture, we recommend leaving the door or windows of your building open from time to time, to allow the fresh air to circulate. We also advise against storing wet or damp items in your garden building as this will also increase the level of moisture in the building. If mould or mildew does start to form within your building we recommend using an anti-mould cleaner to remove it and to prevent it spreading, which if left untreated could permanantly damage your garden building.
Splits, Cracks & Knots
Small splits and cracks in some components or holes may appear where knots shrink and fall out. This will not affect the structure of your garden building however if you wish to fill them this can be easily done using any good quality wood filler


Sap
Sap is naturally occurring in wood and may appear in some boards of your garden building. If you wish to remove the sap, we advise waiting until it is dry and then using a sharp knife to carefully remove it. If the removal of the sap causes a hole in the timber, we recommend using a good quality wood filler to fill it.
Please be aware that these are natural timber characteristics which in most cases will not impact the structure or function of the garden building, therefore are not considered as product defects (as outlined within our Terms & Conditions). If you require further advise or information please contact our friendly Customer Services Team.