Solar Powered Floating Fountain Water Feature
Now Just: £19.99
3/5 (60%) 1 Reviews
- 4 spray heads; Interchangeable heads, one stream, one triple jet and two multi-jet nozzles
- Solar powered; The feature has a large inbuilt solar panel that powers the pump whilst in direct sunlight
- Self-contained; No need to connect to a water supply, simply place in a pond and the pump will do the rest
- Versatile; Can be free-floating or anchored using marginal plants or other features
- Guarantee; 12-month guarantee
Available for delivery on Feb 05 2021
DescriptionCreate an exciting focal point in your pond with this floating solar water feature. This attractive design can float freely or be anchored down in a body of water.
The water feature is self-contained, making it great for those who don’t have a mains water supply through their garden or courtyard. Simply place the feature in a body of water and the included pump will push water through the central spout. The feature comes with four different fountain heads allowing you to choose an effect that can shoot water up to 60cm high.
The pump is solar powered, meaning there are no extra hidden running costs as it simply works by using sunlight. The pump has no wires and sits under the feature, whilst the large solar panel is built into the top of the water feature design. The feature must be placed in direct sunlight to work.
Constructed from a highly durable plastic, this feature will withstand even the worst of weather, it will not rust or crack and is lightweight for easy placement and portability.
In the sunlight, this feature will create a relaxing and tranquil atmosphere with the gentle sound of cascading water, while supplying aeration to your pond at the same time.
Jet head lift: 30 – 60cm
Flow rate: 180L/H
4 x fountain heads
Delivery InformationDelivery on this product is available to most UK Mainland addresses.
We take every care to ensure that you receive the correct goods in perfect condition. In the unlikely event that you ever need to return any item to us and it is within our 30-day warranty period then please contact us for a returns authorisation number. Our customer service team will then provide you with our returns address.
All goods must be returned via recorded, insured method at your own cost. We cannot be held responsible for returns parcels lost in transit. It is the sender's responsibility to ensure parcels are adequately insured. If the goods exceed Â£46 in value we strongly suggest that you take out additional insurance. In order that we can satisfy your requirements promptly we will need your full instructions, explaining the reason for the return and the action you wish us to take.
Unlike many companies, we publish all of our reviews - good or bad - to give you, the customer, total transparency and peace of mind.
Natural Wood Characteristicts
As wood is a natural material it may be affected by the following:
Shrinkage & Warping
The timber used in the construction of your garden building will have retained some of its natural moisture content. The moisture content of the timber will vary, depending upon prevailing environmental conditions, which will result in the components either naturally expanding or contracting. As the components dry out shrinkage may occur. A good waterproofing treatment from the start is the best protection to minimise the effect of moisture loss/intake.
Damp & Mould
During the winter months, cold and damp conditions can result in an increased amount of moisture within your garden building, especially when used infrequently. Condensation can form on the timber and other items stored within your garden building. If left this moisture is likely to cause mould and mildew. To prevent the build-up of moisture, we recommend leaving the door or windows of your building open from time to time, to allow the fresh air to circulate. We also advise against storing wet or damp items in your garden building as this will also increase the level of moisture in the building. If mould or mildew does start to form within your building we recommend using an anti-mould cleaner to remove it and to prevent it spreading, which if left untreated could permanantly damage your garden building.
Splits, Cracks & Knots
Small splits and cracks in some components or holes may appear where knots shrink and fall out. This will not affect the structure of your garden building however if you wish to fill them this can be easily done using any good quality wood filler
Sap is naturally occurring in wood and may appear in some boards of your garden building. If you wish to remove the sap, we advise waiting until it is dry and then using a sharp knife to carefully remove it. If the removal of the sap causes a hole in the timber, we recommend using a good quality wood filler to fill it.
Please be aware that these are natural timber characteristics which in most cases will not impact the structure or function of the garden building, therefore are not considered as product defects (as outlined within our Terms & Conditions). If you require further advise or information please contact our friendly Customer Services Team.