Work Expert 5 in 1 Distance Measurer
Now Just: £9.99
- Large range; Easy to use and accurate with an impressive range of 0.4 – 12 metres
- 5 in 1; Measure distances, stud scan, metal scan, electricity scan and integral spirit level
- Easy to use; High Visibility LCD screen with backlight display. Easy to navigate modes with large buttons
- Multiple functions; Area and volume calculation, add and subtract, memory store and clear
- Guarantee; 12-month guarantee
Out of Stock
DescriptionWork Expert five-in-one Distance Measurer
If you have ever struggled to measure room dimensions when buying a sofa, fitting flooring, calculating wall sizes for buying wallpaper or paint, then this five-in-one 1 Ultrasonic Distance Measurer from Work Expert is the solution.
This handy, compact device calculates length, area & volume with both imperial and metric units of measurement. It has an impressive range of 0.4 to 12 metres. What's more, you can also detect wood, metal and live wires behind walls, so you can decorate your home safely and accurately. The unit also has an inbuilt laser and spirit level for complete accuracy.
The in-built LCD screen with backlight display is easy to read, and the mode is simple to navigate through. There is also a convenient add and subtract function and memory store.
Ultrasonic distance measurement with 2 positions for height & length
Easy to read LCD display
2x Spirit levels and Class II laser liner for accurate alignment
Max power output: <1mW
Measures: 160 x 64 x 46mm
Detects live wires, wood and metal behind walls
Requires 1 x 9V battery (not included)
Delivery InformationDelivery on this product is available to most UK Mainland addresses.
We take every care to ensure that you receive the correct goods in perfect condition. In the unlikely event that you ever need to return any item to us and it is within our 30-day warranty period then please contact us for a returns authorisation number. Our customer service team will then provide you with our returns address.
All goods must be returned via recorded, insured method at your own cost. We cannot be held responsible for returns parcels lost in transit. It is the sender's responsibility to ensure parcels are adequately insured. If the goods exceed Â£46 in value we strongly suggest that you take out additional insurance. In order that we can satisfy your requirements promptly we will need your full instructions, explaining the reason for the return and the action you wish us to take.
Natural Wood Characteristicts
As wood is a natural material it may be affected by the following:
Shrinkage & Warping
The timber used in the construction of your garden building will have retained some of its natural moisture content. The moisture content of the timber will vary, depending upon prevailing environmental conditions, which will result in the components either naturally expanding or contracting. As the components dry out shrinkage may occur. A good waterproofing treatment from the start is the best protection to minimise the effect of moisture loss/intake.
Damp & Mould
During the winter months, cold and damp conditions can result in an increased amount of moisture within your garden building, especially when used infrequently. Condensation can form on the timber and other items stored within your garden building. If left this moisture is likely to cause mould and mildew. To prevent the build-up of moisture, we recommend leaving the door or windows of your building open from time to time, to allow the fresh air to circulate. We also advise against storing wet or damp items in your garden building as this will also increase the level of moisture in the building. If mould or mildew does start to form within your building we recommend using an anti-mould cleaner to remove it and to prevent it spreading, which if left untreated could permanantly damage your garden building.
Splits, Cracks & Knots
Small splits and cracks in some components or holes may appear where knots shrink and fall out. This will not affect the structure of your garden building however if you wish to fill them this can be easily done using any good quality wood filler
Sap is naturally occurring in wood and may appear in some boards of your garden building. If you wish to remove the sap, we advise waiting until it is dry and then using a sharp knife to carefully remove it. If the removal of the sap causes a hole in the timber, we recommend using a good quality wood filler to fill it.
Please be aware that these are natural timber characteristics which in most cases will not impact the structure or function of the garden building, therefore are not considered as product defects (as outlined within our Terms & Conditions). If you require further advise or information please contact our friendly Customer Services Team.