Zennox LED V Shape Solar PIR Light
Now Just: £14.99
5/5 (100%) 1 Reviews
- PIR movement detection; When motion is detected the light automatically illuminates
- Solar-powered; No extra costs as it is powered by sunlight
- Weatherproof; The solar light is encased in weather-resistant casing allowing it to be kept outdoors all year round
- Deterrent; The light will act as a deterrent to any potential intruders
- Guarantee; 12-month guarantee
Zennox LED V Shape Solar PIR Light
Keep pathways, steps, gardens and alleyways visible at night with the help of this solar-powered LED V-shaped security wall light from Zennox. Perfect for increasing night time visibility for you and your guests, this light will also work as a deterrent to potential intruders.
This smart security light has no overheads or running costs, instead taking its power from the integrated solar panel. By expending energy from the sun, you benefit from no running costs and the lights will automatically light up when motion is detected. During the day, the solar panel transfers solar power into the rechargeable battery.
When the light is switched on, the light will automatically illuminate once motion is detected and stay on for approximately 20 seconds, it will then turn off until more motion is detected. The light features eight LEDs.
Please note: How long the light lasts will depend on its location, weather conditions and the seasonal light available.
Dimensions: L14 x W10 x H8cm
Requires 1 x 3.7V 1200mAh Li-Ion rechargeable battery (included)
Requires 8-12 hours of sunlight for a full charge
Delivery InformationDelivery on this product is available to most UK Mainland addresses.
We take every care to ensure that you receive the correct goods in perfect condition. In the unlikely event that you ever need to return any item to us and it is within our 30-day warranty period then please contact us for a returns authorisation number. Our customer service team will then provide you with our returns address.
All goods must be returned via recorded, insured method at your own cost. We cannot be held responsible for returns parcels lost in transit. It is the sender's responsibility to ensure parcels are adequately insured. If the goods exceed Â£46 in value we strongly suggest that you take out additional insurance. In order that we can satisfy your requirements promptly we will need your full instructions, explaining the reason for the return and the action you wish us to take.
Unlike many companies, we publish all of our reviews - good or bad - to give you, the customer, total transparency and peace of mind.
Natural Wood Characteristicts
As wood is a natural material it may be affected by the following:
Shrinkage & Warping
The timber used in the construction of your garden building will have retained some of its natural moisture content. The moisture content of the timber will vary, depending upon prevailing environmental conditions, which will result in the components either naturally expanding or contracting. As the components dry out shrinkage may occur. A good waterproofing treatment from the start is the best protection to minimise the effect of moisture loss/intake.
Damp & Mould
During the winter months, cold and damp conditions can result in an increased amount of moisture within your garden building, especially when used infrequently. Condensation can form on the timber and other items stored within your garden building. If left this moisture is likely to cause mould and mildew. To prevent the build-up of moisture, we recommend leaving the door or windows of your building open from time to time, to allow the fresh air to circulate. We also advise against storing wet or damp items in your garden building as this will also increase the level of moisture in the building. If mould or mildew does start to form within your building we recommend using an anti-mould cleaner to remove it and to prevent it spreading, which if left untreated could permanantly damage your garden building.
Splits, Cracks & Knots
Small splits and cracks in some components or holes may appear where knots shrink and fall out. This will not affect the structure of your garden building however if you wish to fill them this can be easily done using any good quality wood filler
Sap is naturally occurring in wood and may appear in some boards of your garden building. If you wish to remove the sap, we advise waiting until it is dry and then using a sharp knife to carefully remove it. If the removal of the sap causes a hole in the timber, we recommend using a good quality wood filler to fill it.
Please be aware that these are natural timber characteristics which in most cases will not impact the structure or function of the garden building, therefore are not considered as product defects (as outlined within our Terms & Conditions). If you require further advise or information please contact our friendly Customer Services Team.