Zennox Twin LED Motion Sensor Spotlight - Black
Now Just: £9.99
- Intelligent detection; Lights up your garden, driveway or path when motion is detected within 5.5 metres and within the impressive 120-degree detection angle
- Weatherproof; The light is encased in weather-resistant casing allowing it to be kept outdoors all year round
- Easy to install; Comes complete with wall fixings so it can be securely mounted in position
- Battery saving; The light will not work during bright daylight to save the battery
- Guarantee; 12-month guarantee
Out of Stock
Description
Zennox Twin LED Motion Sensor Spotlight
Keep pathways, steps and driveways visible at night with the help of this twin LED light sensor spotlight from Zennox. Perfect for increasing night time visibility for you and your guests, it also works as a deterrent to potential intruders.
Intelligent Detection
The security light is fitted with a motion sensor that will automatically light up whenever motion is detected. It will detect movement within 5.5 metres of its impressive 120-degree detection angle. The security light is easy to use and comes complete with wall fixings so it can be securely mounted in position.
Specifications
Dimensions: L8 x W7 x W11.5cm
Weight: 0.11kg
4x AA batteries required (not included)
Sheducation
Natural Wood Characteristicts
As wood is a natural material it may be affected by the following:
Shrinkage & Warping
The timber used in the construction of your garden building will have retained some of its natural moisture content. The moisture content of the timber will vary, depending upon prevailing environmental conditions, which will result in the components either naturally expanding or contracting. As the components dry out shrinkage may occur. A good waterproofing treatment from the start is the best protection to minimise the effect of moisture loss/intake.

Damp & Mould
During the winter months, cold and damp conditions can result in an increased amount of moisture within your garden building, especially when used infrequently. Condensation can form on the timber and other items stored within your garden building. If left this moisture is likely to cause mould and mildew. To prevent the build-up of moisture, we recommend leaving the door or windows of your building open from time to time, to allow the fresh air to circulate. We also advise against storing wet or damp items in your garden building as this will also increase the level of moisture in the building. If mould or mildew does start to form within your building we recommend using an anti-mould cleaner to remove it and to prevent it spreading, which if left untreated could permanantly damage your garden building.
Splits, Cracks & Knots
Small splits and cracks in some components or holes may appear where knots shrink and fall out. This will not affect the structure of your garden building however if you wish to fill them this can be easily done using any good quality wood filler


Sap
Sap is naturally occurring in wood and may appear in some boards of your garden building. If you wish to remove the sap, we advise waiting until it is dry and then using a sharp knife to carefully remove it. If the removal of the sap causes a hole in the timber, we recommend using a good quality wood filler to fill it.
Please be aware that these are natural timber characteristics which in most cases will not impact the structure or function of the garden building, therefore are not considered as product defects (as outlined within our Terms & Conditions). If you require further advise or information please contact our friendly Customer Services Team.