During our manufacturing process, we dip treat all our entire range of greenhouses. This involves applying a water based colourant to your garden building, protecting your greenhouse whilst it is in storage and transit. However, it is important to note that this treatment is not a preservative. Therefore, your garden building will still require a high-quality timber preservative and waterproofing top coat as soon as possible after construction.
Before purchasing your new greenhouse be sure to check the specific measurements of its size in the Specification section of the product listing. As often in product titles, we round up measurements just so it’s easier for you to find your perfect garden building.
How will my new greenhouse arrive?
Your new greenhouse will be supplied as a flat-pack DIY kit with full instructions. If you’re taking on the project yourself, be sure to check out our Self-Installation advice page for plenty of helpful tips.
We strongly advise if you are planning on using a third party installer to construct your greenhouse that you do not book their services until you receive and are happy with your garden building. As we do not cover any third party cost in the instance of a failed delivery or a damaged item preventing installation.
Please note that this greenhouse has been dressed to look its very best in our product images. Any accessories or fixtures featured are not supplied with this garden building. Also, unless our Ready Painted and Installation Service is selected all of our greenhouses are delivered unpainted.
As standard, this greenhouse includes a 1 year Manufacturer’s guarantee, as well as a 10 Year Anti-rot Guarantee*. Just make sure to follow the product instructions and our manufacturers recommendations and your guarantee will be good to go.
All of our Dip Treated garden buildings benefit from our 10 Year Anti-rot Guarantee. This will cover your garden building against fungal decay as long as the conditions of the gurantee have been followed.
These conditions include treating your new garden building with a high-quality timber preservative and waterproof top coat.Treatments of this sort should be applied as soon as your garden building has been constructed, and reapplied annually thereafter. This will enable you to maintain your 10 Year Anti-rot Guarantee and will keep your greenhouse in tip-top condition!
Please note that our 10 Year Anti-rot Guarantee does not cover your garden building from the movement of timber that takes place over time. This includes; the twisting, warping and splitting of timber.
For more information on our 10 Year Anti-rot Guarantee please refer to our Terms & Conditions.
We work hard to design all of our garden buildings to adhere to the planning permission guidelines. However, we cannot guarantee that planning permission will not be required. Therefore, before constructing your garden building we advise checking with your local authorities.
A flat, level base is essential when building your new greenhouse. We recommend the following bases; concrete, slab paving, ground-level bearers or a wooden frame.
Prior to building your greenhouse be sure to check your base is level in both directions. If the base of your greenhouse is not level when it is constructed it will cause the building to twist and warp with the natural movement of the timber. Therefore, it is really important to adjust your base accordingly to achieve this before constructing your garden building.
For more information on how to build a suitable base take a look at our handy guide.
To ensure your greenhouse stands the test of time it’s important to follow the guidance outlined in your building’s product instructions and Manufacturer’s Recommendations.
We have also created these super handy Maintenance Guides to help you take care of your garden building. They are full of our expert advice and useful tips so you can enjoy your greenhouse for years to come!
However, if you do need any further support, don't worry we are on hand to help. Just give our friendly Customer Service Team a call on 0800 029 1000.
A clear film is used to protect your Styrene windows. Once your log cabin is installed and treated this will need to be removed. This can be done by simply scoring around the edge of the window and peeling back the plastic covering inside and out.
The windows of our garden buildings are designed to fit well. However, over time due to the natural movement of the timber small gaps can occur. To prevent this from occuring make sure to seal your Styrene windows with a silicone sealant inside and out. To see exactly how to do this, take a look at our Protect Your Shed - Silicone Window Sealant video.